Ordering a modern cabinet at a workshop price in Tehran means the complete elimination of the 30-45% commission of exhibitors and a direct contract with the manufacturer and the CNC cutting and assembly workshop in centers such as Chahardangeh, Khavaran or Jajroud. In this way, the cost estimate is calculated based solely on the standard square footage, depth of the unit, and selected fittings, and the employer does not pay for the show room rental and marketing. Direct monitoring of the thickness of the MDF board and the standard of the PVC strip reduces the risk of quality loss in direct purchase to zero.
The real difference between buying directly from the workshop and ordering from Tehran exhibitions
In the decoration market of Tehran, the exhibitions generally play the role of marketing intermediary and after collecting the trade profit, they leave the order to the active workshops in the outskirts of the city. In our field experiences, we have repeatedly faced a significant price difference between the pre-invoice of the store and the direct output of the production line; The difference that sometimes reaches several million tomans per meter of cabinet length.
Buying a workshop leaves you free to control the quality of the material. When the order is made from the workshop, it is possible to physically check the MDF core before cutting, while in the exhibition process, the customer does not know the internal material of the units until the day of installation of the final product.
The formula for calculating the total price of modern cabinets and pre-invoice tricks
The most common financial trap in the cabinet market is relying on asking the price per meter of the phone. The standard Union formula is based on one meter of length consisting of 60 cm floor units and 40 cm overhead units, but modern designs usually have standing wardrobes, pantry units, islands and floor-to-ceiling cabinets, which have different calculation coefficients.
In practice, it has been observed that some manufacturers declare the base price to be low, but in the final invoice, they add the costs of transportation, extra floors, quiet fittings, J-Shape hidden handles and cutting the sink exponentially. To prevent this from happening, it is necessary to request a "final pre-invoice with a lump sum price of consumables" before starting cutting.
Comparison of widely used materials in modern style: high gloss, matte MDF and polyurethane
Choosing a cover in a modern cabinet depends more on its resistance to scratches, grease resistance and light reflection than beauty. In the projects of low area of Tehran apartments, high glass makes the space appear larger due to the high reflection of light, but sensitivity to finger stains is one of its main disadvantages.
Matte and supermatte sheets (softtouch) create a modern, minimal and luxurious effect, provided that the coating layer is of anti-scratch polymer type. Polyurethane is also the most expensive and flexible option, which allows painting on raw MDF in workshops equipped with an isolated paint room, but it has a high sensitivity to the thickness of the paint layer.
Material technical comparison table and workshop cost estimate
Type of material and finish | Resistance to scratches | Light reflection rate | Suitable for style Executive | Finished Cost Ratio (Base: Normal MDF) |
Corporate Matte MDF | High | matt (non-reflective) | minimal, modern, economical | 1 layer (base) |
Iranian high glass (clean wood, etc.) | Medium | Glossy and mirrored | Modern, small kitchens | 1.2 to 1.3 times |
High Gloss Turkish (AGT and Ishik) | Good | Deep gloss | Modern luxury | 1.5 to 1.7 times |
stainless supermat coating (polyglass) | very high | deep velvet matte | Modern Contemporary | 1.8 to 2 times |
Polyurethane paint (colored cabinet) | High (depending on the quality of the paint ) | matte, semi-glossy or glossy | specific modern and neoclassical | 2.3 to 3 times |
Step-by-step construction steps from 3D design to cutting and assembling the PVC tape
The engineering process of making cabinets in pavement decoration starts with accurate laser measurements. An error of even a few millimeters in the uneven walls of residential buildings can destroy the entire balance of modern units.
After the design is approved, the output file is directly entered into the three-blade cutting machine or CNC. The most sensitive technical part in the workshop is the PVC edge banding stage. The use of granule glue with a suitable temperature and a strip with a real thickness of 2 mm creates an impermeable barrier against moisture and prevents MDF from blowing up in the vicinity of the sink and dishwasher.
Final delivery checklist and cabinet installation at the project site
The installation stage determines the final quality of the workshop. In the modern style, where the doors are executed without external handles or with smooth magnetic lines, the precise adjustment of the hinges and the creation of uniform distances (seams of up to 3 mm) are of vital importance.
When delivering the project, the employer must carefully check the complete alignment of the work surface with a masonry or digital level, the airtightness of the edges of the sink, the function of the pump hinges with open and soft closing tests, and the firm connection of the fibers behind the cabinet. Handing over the work must be subject to the final settlement after the rigging is completely removed.